< Previous item  |  Next item >

LUNCH Pull Out Table | 895mm | Frame Only

This ingenious design has been developed to maximise space saving in smaller areas, or where a clutter free environment is required. Designed to sit neatly hidden away behind a drawer front, this system simply pulls out and gives you a choice of table widths.

These are perfect for small kitchens, kitchenettes, laundry rooms, offices, playrooms and childrens bedrooms. Recent applications have also included mobile homes and caravans.

Although this unit is frame only allowing you to match to an existing worktop finish, we also offer the same range but with a fitted white melamine top - see cross selling options below!

Available in a choice of widths, this system will give you a pull out workable table top area of approx. 900mm in length. There's no need to store extra components, extensions etc. elsewhere as everything is compactly designed within the drawer ready for you to simply open the hinged front of the drawer space.

Useful Information, for this free standing peninsula table frame :

Standard frame finish - Inox Bronzino
Boxed individually and neatly - 118cm x 17cm x 8cm and 5kg
Sliding mechanism - Alumiuium on Aluminium
Minimum drawer depth required - 540mm
Table Top Length Extended - 900mm
Gap for Runners, per side - 15 to 20mm
Load Capacity - 60kg Evenly Distributed

For more info inc. a full list of contents, check out the technical data tab!

We also offer a +39 version which has been designed for narrow cabinet depths (390mm +) – you can find a link to the +39 version of this frame below, under the ‘customers also viewed’ section.

** We recommend you enlist the services of a carpenter or professional kitchen fitter to install this unit, and please ensure they’re aware of the installation overview video that can be found on every product page – the relevant set of installation instructions will always be included in the box with the product but if needed, a copy can normally be found within the Technical Data tab, along with any other useful info. **

The entire range is constantly being developed and although we list the most popular models available, other options and specials can be made available on request, subject to minimum order requirements.

 
450mm Wide In Stock More Info (104041117814)  
 
600mm Wide In Stock More Info (104061117814)  
 
900mm Wide In Stock More Info (104091147814)  
 
1200mm Wide In Stock More Info (F-07032-1200-140) 15% OFF Clearance

£ each £ total

** % shown will be reduced on the next page, subject to availability

Buy more and save.
** For larger quantities please add to basket and then adjust in the basket

1 2 3 4 5+
£182.68
Each
£173.07
Each
£163.46
Each
£153.84
Each
£144.23
Each

ACCESS TRADE PRICES REQUEST A QUOTE

Prices exclude VAT. Display prices including VAT.

There are currently no reviews for this product. Why not submit a review?

Do you have a question? Submit FAQ

I have bought the 600mm wide pull out lunch table. Im sorting out the units needed right now. Can you verify that the drawer height it goes in needs to be min 120mm then add the two table tops ??? page 3/7 of your instructions. also can you verify what size table top i need to get made, is it the 420 and 529 on page 3/7 and what would the width be (for a 600mm drawer) many thanks for your answers

Hi Sharon, The drawer height ("H" in the drawings on page) is listed as being a minimum of 120mm. This is the required vertical free space inside the cabinet for the framework and top when folded up and retracted into the unit. If you have less than 120mm vertical height in the drawer space then this unit will not be suitable. With regards to the top width this would depend on which version of the LUNCH system you have. There is a revised December 2016 version that requires a different top size from the original. The paper instructions you have in the box will be correct for your unit. Based on your comment above about "page 3/7" this would suggest you have the new, December 2016 model. If that is correct then Page 3 of the instructions states that the top width (z) is "L - 5mm". "L" is the internal cabinet width. So based on that you would need measure the internal width of the cabinet and subtract 5mm from that size - which will give you the width you need your tops to be however please check this on the instructions you have in the box (the bottom right of page 3). Im sure if you gave these instructions to a qualified joiner who is supplying the tops for you they would be able to get the correct sizes they need from those instructions. And as always we recommend these units are installed by a professional. I hope that helps. Kind Regards, BOX15

If I buy the 450mm lunch pull out table what is the minimum internal space needed for it go fit in. Ie. Do I need a 500mm base unit.

Hello. All of the critical dimensions are listed in 'Dimensions' in the technical data tab. Kind regards, BOX15

How thick can the table top be? (min-max) Youalso have version with top. How thick is the table top in that model?

Hello. The table top can be 15-20mm thick. You can view this information by clicking on the technical data tab, where you will find Assembly Instructions & Dimensions. The option that comes complete with a top comes with a 16mm white laminate top. I hope this helps. Kind regards, BOX15 Team

RECENTLY VIEWED ITEMS